PTFE LINED EQUIPMENT

PTFE Lined Valves, Sight Glass & Process Equipment

Review corrosion-resistant flow components and special lined equipment around the process medium, connection standard and plant interface.

REQUEST EQUIPMENT QUOTE ↗
EQUIPMENT SELECTION

Define the process interface, then confirm the lining scope.

A lined valve or equipment item is a complete interface: body or shell, liner, connection, rating, actuation or access requirements and inspection evidence must work together in the installed line.

What to include in a PTFE lined equipment enquiry

  • Equipment: valve, sight glass, strainer, expansion joint, spacer or special component.
  • Interface: nominal size, pressure class, flange standard, facing, orientation and mating equipment.
  • Service: medium, concentration, temperature, pressure, vacuum and flow requirements.
  • Evidence: inspection, lining test, marking, packing and document requirements.

For pipe spools and fittings, visit PTFE lined systems. For a non-standard equipment interface, start with custom PTFE lined fittings.

Custom PTFE lined equipment: define the replacement interface

For a replacement in an existing steel PTFE lined process line, identify the equipment tag, drawing revision and fixed mating dimensions. Select the component below to prepare its specific requirements; material suitability and the final assembly scope require project review.

ComponentFunction to defineInstallation details to provide
PTFE lined valveIsolation or control duty, valve arrangement and manual or powered operationFace-to-face length, flange orientation, actuator envelope and access
PTFE lined sight glassRequired viewing arrangement and process observationWindow position, viewing clearance, seal requirements and maintenance access
PTFE lined basket strainerRequired particle retention, flow and permitted pressure dropBasket aperture specification, removal direction and cover clearance
PTFE lined expansion jointAxial, lateral or angular movement requirements and operating cyclesInstalled length, movement directions, restraints and adjacent supports for engineering review

Prepare a comparable equipment quotation

Mark dimensions that must match the existing line and distinguish them from dimensions open for review. Include the body or shell specification, requested liner, medium, temperature, pressure or vacuum, quantity and required records. Photographs provide context; confirm the dimensional reference before ordering.

Agree inspection and document scope · Prepare the lined component RFQ · Prepare a custom lined equipment enquiry

Frequently asked questions

What PTFE lined equipment can be specified?

The equipment range includes lined valves, sight glasses, basket strainers, expansion joints and project-specific spacers or isolation components. Final configuration depends on the process connection and service conditions.

What information is needed for a lined valve or equipment quotation?

Provide equipment type, nominal size, pressure class, connection standard, lining material, medium, design temperature, pressure or vacuum, quantity and required inspection or documentation.

Can a lined equipment item be made to an existing plant interface?

Yes. Send the controlled drawing, equipment data sheet, flange details or a measured interface reference. Fixed dimensions and orientation should be identified so the proposed item can be reviewed against the installation.

PROJECT ENQUIRY

Have a lined fitting
or spool drawing?

Share the shell, liner, connection and service details available for your lined component enquiry.

Accepted:PDFDWGSTEPExcelImagesBOM

Prepared for: Custom PTFE lined equipment

REQUEST A QUOTE ↗